Maxxis High Roller 3 27.5x2.40 2x120 TPI 3C MaxxGrip EXO+ Folding Tubeless Tyre

Description

Positioning itself between the Assegai and the Shorty in the Maxxis gravity range; the third generation High Roller combines an open center tread pattern and with large; well supported side knobs to withstand extreme cornering forces

Its a hybrid tread design that provides the soil penetration of a wet weather mid-spike while retaining the cornering control and hard surface traction of a dry conditions tyre

The High Roller III was developed for the demands of modern downhill and has already claimed a win at Mont Sainte Anne under Jackson Goldstone

Specification

Refined and redesigned; ready to shred any line

Best for Loose/Hard; Medium; Loose; Wet

Cornering Control 1 2 3 4

Rolling Efficiency 1 2 3 4

Compound: 3C MaxxGrip

Breaker: EXO+

Bead Type: Folding

Tubeless Tyre

TPI: 120

Weight: 1058g

3C MaxxGrip
3C MaxxGrip uses the softest rubber compounds to offer the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications
EXO+
Our EXO+ construction combines two of our best puncture protection

materials: SilkShield and EXO. The SilkShield layer runs from bead-to-bead with a layer of EXO along the sidewalls. Combined; these two materials create EXO+ which improves tread puncture protection by 27% sidewall durability by 51% and resistance to pinch flats by 28% Wide Trail
Wide Trail (WT) construction optimises the tyres tread layout and profile on todays modern; wider rims. Traditional tyres are designed around older; narrower rims and can create an overly square tyre profile; leading to less than optimal performance. WT tyres are optimised for a 35mm inner rim width but are proven to work over a range from 30-35mm inner rim widths; depending on the riders preference
Tubeless Ready
Tubeless tyres provide the rider with many benefits: the ability to run lower air pressures; which improves traction; lower rolling resistance when compared to a tube-type tyre; and less chance of flatting since there is no tube. Liquid sealants should only be used in the following types of tyres: Tubeless Road; Tubular; and Tubeless Ready. The use of liquid sealants in any other Maxxis tyre will void the warranty Find out more about Maxxis technology here.